Back To Home

How to Stop Rain Blowing Under Roof Tiles

Written By

Carmen

/

Do you ever find that when it rains, the wind blows water underneath your roof tiles? This is a timely problem with the rainy season upon us. This problem can be solved with a few simple steps.

How to Stop Rain Blowing Under Roof Tiles

There are ways how to stop rain blowing under roof tiles and help keep your home dry even during those heavy downpours. In this blog post, we’ll walk you through some of the best solutions to prevent rain from entering your home, so you can take back control over mother nature!

What Causes Rain Blowing Under Roof Tiles?

Rain blowing under roof tiles is typically caused by a lack of maintenance. Over time, the sealant around the edges of your roof tiles will begin to degrade due to rain, sun, and wind exposure. This can create gaps between the tiles themselves, allowing water to find its way in underneath them. It creates many problems, such as water damage and mold, which will deteriorate the roof’s structure.

Can You Do It Yourself?

Yes, you can do it yourself! With the right tools and some attention to detail, anyone should be able to fix this issue. It’s not tough to do, but it does require a bit of time and patience. You can take care of this problem without having to hire a professional if you’re willing to put in the effort.

Things You Will Need to Stop Rain Blowing Under Roof Tiles

In order to stop rain from blowing under roof tiles, you will need a few supplies. These include:

  • Rubber mallet
  • Safety glasses
  • Roofing tar or sealant
  • Nail gun with nails

10 Steps on How to Stop Rain Blowing Under Roof Tiles

The best way to stop rain from entering your home is by regularly cleaning and maintaining your roof tiles or replacing broken ones. Here are a few steps on how to do it.

Replacing Broken Tiles

Step 1: Inspect the Roof

The first step is to inspect your roof for any signs of damage. Look for missing, cracked, or broken tiles and note their location. The damaged tiles should be replaced as soon as possible.

Step 2: Clean the Roof

Once you’ve identified which tiles need to be replaced, use a rubber mallet to remove them carefully. Be sure to wear safety glasses to protect your eyes from any debris. Use a broom or brush to clean debris from the roof tiles and any cracks between them. This will help you see where water may be entering your home more clearly.

Step 3: Sealing Gaps

Once the roof has been cleaned, use roofing tar or sealant to fill any gaps between tiles. Try to keep a consistent line of sealant around each tile and make sure it is firmly in place. You can also use a nail gun with nails for extra security.

Step 4:Install New Tiles

If any of the old tiles have been damaged beyond repair, you will need to install new ones. Purchase your desired tile and install them in the same pattern as the rest of the roof. Using a rubber mallet, tap each new tile firmly into place.

Step 5: Seal Around New Tiles

Once all new tiles have been successfully installed, use sealant to fill any gaps between them and the neighboring tiles. Make sure it is firmly in place so water has no way of getting in underneath.

Step 6: Clean Again

Once you’ve finished sealing around each tile, give the roof a thorough cleaning with a broom or brush. This will help ensure that all debris and dirt are removed, allowing the sealant to set properly.

Step 7: Paint

To keep your roof looking its best, you can paint over any exposed sealant or tiles. This will help protect them from further damage caused by UV rays and rain.

Roof Looking Its Best

Step 8: Check for Leaks

Once you’ve finished painting, it’s time to check for leaks. Fill a bucket with water and place it near the edge of your roof. If any water is able to enter your home after a few minutes, then there may still be gaps that need repairing. However, if no water enters, then you have successfully stopped the rain from entering your home.

Step 9: Re-Inspect Regularly

It’s important to regularly inspect your roof and clean it as necessary. This will help you keep on top of any potential problems before they become too serious and also ensure that water isn’t able to enter your home.

Step 10: Enjoy

Once you’ve successfully stopped the rain from entering your home, it’s time to sit back and enjoy. Knowing that you have a well-maintained roof is a great feeling! Plus, it will help protect the structure of your home and keep it looking great for years to come.

10 Safety Precautions to Follow

  1. Wear the appropriate safety gear, such as a hard hat, gloves, and steel-toed boots.
  2. Avoid working on wet tiles or surfaces, as slipping is more likely to occur in these conditions.
  3. Have a second person with you while you work on the roof to provide extra support and help with any heavy lifting that may be necessary.
  4. Avoid standing on the roof for long periods of time; take frequent breaks and stay hydrated.
  5. Securely fasten any ladders used in order to access the roof, ensuring all locks are engaged before climbing up or down.
  6. Never throw or push objects off the roof, as they may land on someone below.
  7. Inspect the roof for any loose or missing tiles before work begins and repair them as necessary.
Inspect the Roof for Any Loose
  1. Use tarps if needed to cover sections of the roof that may become wet during rainstorms, helping to protect workers from slipping hazards.
  2. To stop wind-driven rain from entering under tiles, use a sealant to create an air-tight barrier or install a ridge vent.
  3. Have an additional person on the ground to monitor any hazards and watch for falling debris. Following these safety precautions will help keep you safe while working on how to stop rain blowing under roof tiles.

13 Maintenance Tips

  • 1. Ensure the roof is in good condition and water-tight. Seal any joints, fix loose tiles and make sure any valleys are clear of debris.
  • 2. Install ridge capping, which will act as a barrier to help keep wind-driven rain from blowing under the tiles.
  • 3. Check that all flashings around chimneys and vents are correctly installed. Loosened flashings should be resealed with a suitable sealant.
  • 4. Install bird and bat protection on the ridge capping to prevent birds or bats from reaching areas under the tiles.
  • 7. Check the gutters for debris and blockages, as this can cause water to back up under the ridge tiles, which will then blow in under the roof tiles during strong winds.
  • 8. Fill any gaps between the clay or concrete tiles and mortar with sand or cement mix. Gaps are an easy entry point for wind-driven rain.
  • 9. Use a silicone sealant to fill any gaps between the ridge capping and the roof tiles. The sealant will help to create a waterproof barrier.
  • 10. Install mesh guards along the ridge line of your roof line. The mesh will help deflect wind-driven rain from entering under the tiles.
  • 11. If you have metal or plastic roof sheets, use silicone sealant to fill any gaps between the sheets and around any fixings to ensure water does not
  • 12. Make sure any vents on the roof are securely covered to prevent rain from entering the building through them. Uncovered vents are the easiest way for water to enter the building.
  • 13. Have your roof inspected annually to ensure it’s in good condition and no water is entering the building through any gaps or cracks. Cracks and gaps can be easily fixed with a sealant.

Following these steps and maintenance tips will help you to learn how to stop rain blowing under roof tiles, ensuring your home stays safe and dry. With the right precautions in place, you can keep your roof in good condition and prevent water damage from occurring. It is worth taking the time to inspect your roof regularly and address any issues as soon as they arise to prevent further damage.

Stop Rain Blowing Under Roof Tiles

Conclusion

Although you can buy commercial products to help stop rain from blowing under your roof tiles, there are several DIY approaches that can be just as effective. YOu don’t have to call the professionals in order to keep your roof safe from water damage. Regular maintenance and inspection of your roof is the best way to ensure it remains watertight and protects your home from any water damage.

With a little bit of effort, you can help prevent rain from blowing under roof tiles and keep your home safe and dry during strong winds. Just follow this guide on how to stop rain blowing under roof tiles. By sealing the gaps around your tiles with silicone caulk or by installing ridge vents, you can keep your home dry and comfortable during even the heaviest downpours. For more information on stopping rain from entering your home, contact a local roofing contractor.

You Can Check It Out to Build a Knee Wall

Leave a Comment