Are you frustrated with uneven concrete around your swimming pool that affects the look of your backyard? Uneven concrete is not only unappealing but can also present a tripping hazard. In this blog post, we’ll take a look at why it’s important to fix uneven concrete around the pool and how to do so the right way.
We’ll cover all things from identifying cracks in existing or new concrete, repairing small holes and fissures, fixing expansive joints, leveling large sections of patio slabs, and what kind of tools and materials you’ll need for each project – everything to make sure your pool decking area looks great!
Keep reading this article on how to fix uneven concrete around pool as we dive deeper into what causes these problems as well as how to repair them quickly and properly.
10 Step-by-step Guidelines on How to Fix Uneven Concrete Around Pool
Step 1: Identify Cracks
Look for any cracks, chips, depressions or holes in the concrete around your pool. A good indication of a crack is when the surface appears to be uneven and out of level. If you spot any cracks in the area, it’s important to act quickly in order to prevent further damage. But before you try to fix the problem, make sure to inspect both sides of the crack and determine if it’s still active or not.
Step 2: Repair Small Holes and Fissures
For minor repairs, use a concrete patching compound to fill in any small holes or fissures. Mix the material according to the manufacturer’s instructions, apply it with a trowel, and then smooth out the surface using a damp sponge. Allow the area to dry completely before proceeding. It’s especially important to patch any cracks in the concrete that are near the pool, as these can cause water loss or even a potential safety hazard.
Step 3: Fix Expansive Joints
Expansive joints are caused by soil movement underneath your pool decking. To repair these joints, you’ll need to use an elastomeric sealant that is designed for this type of application. Apply the sealant as per its instructions and allow it to cure according to the manufacturer’s recommendations. It is important to note that this process should be done carefully and precisely, as it can potentially weaken the pool structure.
Step 4: Level Large Sections of Patio Slabs
If large sections of your pool decking are uneven, then you’ll need to use a concrete leveling compound. This material is made from polymers and fillers that help to even out surfaces. Simply mix up the product and apply it over the entire area using a trowel, smoothing out any imperfections as you work your way across the surface. Allow it to dry completely before proceeding.
Step 5: Use Proper Tools and Materials
In order to ensure that all repairs are done properly, you should use tools and materials specifically designed for this type of job. Make sure that you have each of the following items: concrete patching compound, elastomeric sealant, and a concrete leveling compound. If you don’t have these items, then you may want to consider hiring a professional for the job.
Step 6: Clear the Area Before You Begin
Before you start to repair uneven concrete around your pool, make sure that the area is free of any debris or objects that can prevent proper adhesion of materials. Rotary tools with diamond blades are great for removing old sealant or mortar from large areas. However, if you’re dealing with a smaller repair job, then use a hammer and chisel to carefully chip away at any existing sealant.
Step 7: Prepare the Surface
Once you’ve cleared away all debris from the area, use a wire brush to remove any loose particles from the surface. This will ensure that all materials adhere properly during repairs. But before you begin the actual repair process, it’s important to dampen the area so that moisture is not lost during repairs. But, don’t over-saturate the area as this can cause more damage than repair. It’s also important to note that the surface should be allowed to dry completely before repairs begin.
Step 8: Mark Out Areas That Need Repairs
Using a chalk line, mark out any areas that need to be repaired. This will help you easily identify where you should apply materials. Make sure to always wear safety glasses and gloves when using power tools. If you’re dealing with a large repair job, then it’s best to use a wet saw instead of a traditional hand saw. But, if you’re dealing with a smaller repair job then use an angle grinder with a diamond blade to carefully cut away any areas that need to be fixed.
Step 9: Apply Materials
Once the area is prepared, start applying the patching compound, sealant or leveling compound as per their instructions. After each application, wait for it to cure before proceeding to the next repair job. If your pool deck is made from bricks or stones, then you may need to use a mortar mix to fill any cracks and uneven spots. It’s important to be careful when applying any materials and make sure that they are applied evenly.
Step 10: Inspect Your Work
Once all repairs have been made, inspect your work and make sure that everything looks good and level. If you’re happy with the results, then go ahead and enjoy your new backyard oasis! Always remember to use safety precautions when dealing with power tools and make sure to store materials according to the manufacturer’s directions. Otherwise, you may have to start all over again!
Following these simple steps will help you quickly and easily fix any uneven concrete around your pool. Now that you have the knowledge, get out there and start making those repairs! Good luck!
Do You Need to Use Professionals?
If repairs are too large, or you don’t feel comfortable making them yourself, then it might be a good idea to employ a professional contractor. They will have the tools and experience necessary to make sure the job is done right. Request quotes from several contractors in order to get the best deal and ensure that your repair work is done properly.
Uneven concrete around pools can be dangerous and should always be fixed as soon as possible. With these guidelines on how to fix uneven concrete around the pool, you can now easily tackle any repairs that need to be made!
How Much Could It Cost?
The cost of repairing uneven concrete around the pool varies depending on the size of the project, as well as the materials and labor required to complete it. Generally speaking, you can expect to pay between 150 and $500 for small, while larger projects could cost upwards of $2,000. Make sure to get several quotes from different contractors before making a final decision.
Frequently Asked Questions
Q: What is the Best Way to Fix Uneven Concrete Around a Pool?
A: The best way to repair uneven concrete around a pool is to first identify the cause of the problem and then use a combination of concrete patching compound, elastomeric sealant and leveling compound to fix the uneven areas Always make sure that you follow all safety guidelines when using power tools or any other materials.
Q: How Long Does it Take to Repair Uneven Concrete Around a Pool?
A: It depends on how extensive the repairs are, but most repairs should take no more than a few hours. Always be sure to clear away debris from the area and prepare the surface before beginning work. Also, allow each material to cure completely before proceeding onto another repair job.
Q: What Type of Tools Will I Need for Repairs?
A: Rotary with diamond blades for removing old sealant or mortar, a wire brush for cleaning the surface and a trowel for applying leveling compound. Also, be sure to have safety glasses and gloves when using power tools.
Q: What are the Benefits of Fixing Uneven Concrete Around a Pool?
A: Not only will it improve the overall look and feel of your backyard oasis, but properly leveling the concrete can also help to prevent future damage from occurring. This means that you’ll save time and money on repairs in the future!
Conclusion
Thanks for reading this article on how to fix uneven concrete around pool. It’s important to realize that uneven concrete can cause a variety of damage to the surrounding area and pool structure, so it’s best to take action as quickly as possible. There are some easy methods you can use when addressing this problem. Patching can be done with self-leveling cement or by applying a resurfacing agent and brooming it smooth.
Grinding is another effective technique for dealing with uneven concrete, removing any minor bumps or peaks until the surface is level. Laser screeds could also be used in certain situations, which allows for exact levels of accuracy in tackling unevenly settled slabs. However, if you decide to address your pool’s uneven concrete, make sure you follow safety protocols and wear appropriate protective gear.
With these steps in mind, you should have no trouble fixing that pesky uneven concrete around your pool in no time!
