Are you worried that your walls might be losing heat and making it difficult to keep your home warm? It could be a sign of inadequate wall insulation. Inadequate insulation means higher electricity bills and wasted energy, so learning how to check for insulation in walls levels is a must if you are hoping to save money on energy costs in the long term. Luckily, there are easy methods you can use right away to determine whether your walls have enough insulation – just read this blog post for all the information you need!

Why Are the Walls in My House so Cold?
If your walls feel cold to the touch or the temperature in your home remains uncomfortable despite using the heater, it could be due to a lack of insulation. The purpose of insulation is to reduce heat transfer so that your home maintains an even temperature without having to use excess energy. Without adequate insulation, you may find yourself constantly turning up the thermostat, which can lead to higher energy bills.
Fortunately, there are some ways to check for insulation in walls and identify the cause of cold walls in your home. You may need to have an expert inspect the area if you cannot access the walls yourself. However, many homeowners can easily locate areas that may require additional insulation or repair. Additionally, you can also investigate for air leaks around your windows and doors, as these areas may also be contributing to the cold walls in your home.
9 Methods How to Check for Insulation in Walls
1. Check for Cracks or Gaps in the Walls.
If you see any cracks or gaps in your walls, this is a good indication that there is no insulation present. Cracks and gaps can occur due to a variety of reasons, such as the settling of the house or poor construction. To seal any gaps and cracks, you can use caulk or expanding foam. If you notice any large gaps, it’s best to contact a professional for assistance.
2. Check for Drafts.
Another way to check for insulation is to see if there are any drafts present. To do this, you can hold a lit candle up to the wall in various places and see if the flame flickers. If it does, this means there is a draft present and likely no insulation. Additionally, you can feel for drafts by running your hands around the edges of windows and doors. If you feel a draft, there is likely not enough insulation in the wall.
3. Check the Temperature of the Walls.

If you have an infrared thermometer, you can check the temperature of your walls to see if there is insulation present. Insulation will typically make the wall temperature lower than the surrounding air temperature. If the walls are just as warm or cooler than the room, then there may be some insulation present. It’s important to note that this method won’t be able to detect if there is enough insulation present, just that some insulation may be in place. To check the full amount of insulation, it’s best to use a more specialized tool.
4. Listen for Sounds from outside.
Insulation works by absorbing sound waves, so if you can hear sounds from outside coming through your walls, it likely means there is no insulation present. This is especially true for outside noises like passing cars, people talking, or anything else that may not be audible in other parts of the house. If you can hear these noises, it’s an indication that your walls do not have adequate insulation.
5. Feel for Cool or Warm Spots on the Wall.
Another way to check for insulation is to feel for cool or warm spots on the wall. Insulation will typically make the wall cooler in summer and warmer in winter than the surrounding air temperature. If you feel any cool or warm spots, that indicates an area with inadequate insulation. To check for air leaks in the wall, use a smoke pen or stick an incense cone near the suspected leak and observe if smoke is drawn outward.
If you find any air leaks, seal them with caulk or expandable foam. Finally, if you find any insulation that is wet or moldy, replace it immediately to avoid health risks. Keeping your walls properly insulated will help keep your home warm in the winter, cool in the summer and reduce energy costs.

6. Look for Condensation on the Walls.
If you see condensation on your walls, it could be a sign that there is no insulation present. This is because condensation occurs when warm air hits a cold surface, so if there is no insulation, the warm air will cause condensation on the wall surface. If you see condensation, it’s important to investigate further and determine the source before attempting to fix the issue. Additionally, you should check for signs of mold, as this can occur alongside condensation.
7. Look for Mold or Mildew on the Walls.
Mold and mildew can also be an indication that there is no insulation present, as these growths thrive in damp and humid conditions. If you see mold or mildew on your walls, it’s best to have an expert take a look to determine if insulation is indeed lacking. While removing the mold or mildew can help prevent further growth, it won’t fix the underlying problem. Although there are DIY methods to remove mold or mildew, it’s best to call a professional due to the potential health risks associated with such growth.
8. Check Your Energy Bills.
If you find that your energy bills are higher than usual, it could be because your home lacks insulation and heat is escaping through the walls. This is especially true in winter when heating costs are typically higher. If your energy bills seem unusually high, it could be a sign that you need to check the insulation in your walls. Make sure to contact a professional to ensure that the insulation is properly installed and up to current standards.
9. Test for Air Leakage.
Another way to check for insulation is to test for air leakage around windows and doors. You can use an infrared thermometer or a smoke pencil to determine if there are any leaks present. If you find any, seal them up with caulk or weatherstripping to help keep your home warm and reduce energy costs. Additionally, if you notice any gaps in your walls or foundation, consider having them sealed with foam insulation. This will help keep the air from escaping and reduce energy costs further.
By following these steps, you can easily check for insulation in your walls and identify any areas that may need further attention. Insulating your home correctly will help keep your home warm in winter and cool in summer and reduce energy costs. Additionally, taking the time to properly check your insulation can prevent further damage from occurring and help keep your family safe and healthy.

Things to Consider When Checking for Insulation in the wall
1. Determine the Type of Insulation Present in Your Walls –
It is important to know what kind of insulation you have before beginning the process of checking for insulation in your walls. Depending on the type of insulation present, you may need different materials and methods to inspect it properly. Common types of insulation include fiberglass batts, sprayed foam, cellulose, and foam board.
2. Inspect the Condition of the Existing Insulation –
The next step is to assess the condition of the existing insulation. If you have fiberglass batts, check for excess moisture or mold growth, as these can be signs that the insulation has degraded and needs to be replaced. You should also look for gaps in coverage or flattened areas where the insulation may no longer be effective.
3. Check for Proper Ventilation –
Proper ventilation is essential when it comes to insulating your walls. If there isn’t enough air circulating around the wall cavities, then the insulation will not perform at its optimal level. Make sure that all windows and vents are open and free from obstructions so that much-needed airflow can make its way into your home.
4. Examine Your Home’s Heating and Cooling Efficiency –
Finally, it is important to evaluate your home’s heating and cooling efficiency. If you notice your energy bills going up or the temperature inside your home fluctuating unexpectedly, this could be an indication that there may be inadequate insulation in certain areas of your walls. It is best to take a closer look at these areas if you suspect something might be amiss.

Conclusion
If you want to make sure your home is well insulated, checking the insulation in your walls is a great place to start. By following the tips on how to check for insulation in walls we’ve outlined above, you can easily check your insulation and get an idea of whether or not it needs to be replaced. Don’t forget, though, that if you’re unsure about anything or need help with the process, you can always reach out to a professional for assistance. With proper insulation in place, you can enjoy a comfortable home all year long – so don’t put off this important task any longer!
You Can Check It Out to Build a Weeping Water Wall